CP8849 Pack 4.0Ah US

• 4 settings in forward, to be set up with the touch pad on the back side of the tool
  – Slow mode to approach without impacting (hand tightening around 3.7 ft.lbs / 4-5 Nm)
  – Fast mode to tighten wheels close to recommended torque without overtightening (around 50 ft.lbs / 70 Nm)
• 50%: around 425 ft.lbs / 580 N
• 100% of maximum torque around 850+ ft.lbs / 1150+ Nm
• 1 setting @ full power in reverse 850+ ft.lbs / 1150+ Nm
• 5 bumpers all around the tool, 1 in front of the clutch housing
• Brushless motor
• 4 Front LED lights for dark spaces
• Single-hand Forward and Reverse operation plus Safety locking position
• Soft thermoplastic rubber grip

The CP8849 Series is to be used as a « snugging » tool to come close to the car manufacturer’s specified torque rating. The final tightening should be done with a calibrated torque wrench, this way, we ensure the end of overtightening.
Torque results could vary greatly depending on the type of wheel and many other factors.

Contains:
– One CP8849
– Two 4.0 Ah battery packs
– One 20V charger
– One Chicago Pneumatic soft bag
– One US type plug